Welcome, Guest
Username: Password: Remember me

TOPIC: Fitting My Shapton Pro's to WEPS

Re: Fitting My Shapton Pro's to WEPS 10 months 4 weeks ago #11234

  • cbwx34
  • cbwx34's Avatar
  • OFFLINE
  • Moderator
  • WE Stonehenge?
  • Posts: 1240
  • Thank you received: 390
  • Karma: 92
PhilipPasteur wrote:
I had two unopened bottles... one solid as a rock, the other still OK.

.....

BTW Curtis, did you glue these stones to the stock WEPS paddles with plastic platens?

Interesting about the glue... I thought maybe I just got a bad bottle, or let it sit too long. (Well I guess the 2nd part is true... although I didn't expect that from a never opened bottle.)

Didn't glue stones to the WEPS, this was just stones to aluminum... but I recently tried 3M 77 spray regluing the leather to the WEPS paddles. First try didn't take, but I think I went too light. 2nd try, so far so good... but it's only been a few weeks.
The administrator has disabled public write access.

Re: Fitting My Shapton Pro's to WEPS 10 months 4 weeks ago #11250

  • KenSchwartz
  • KenSchwartz's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 94
  • Thank you received: 29
  • Karma: 25
In addition to the Choceras, I have Shapton Pros in all grits 120 to 30,000 available for the Wicked Edge. I also have natural stones of various sorts as well as other stones and will soon be coming out with Nubatama stones for the Wicked edge. Just send me a PM or contact me directly at ksskss @ earthlink.net

---
Ken
The administrator has disabled public write access.
Time to create page: 0.134 seconds