Welcome, Guest
Username: Password: Remember me
Knife Photos

TOPIC: Un named knife

Un named knife 8 months 2 weeks ago #13095

  • LeoBarr
  • LeoBarr's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 598
  • Thank you received: 193
  • Karma: 32
The main bevel is hollow ground, its a lock knife , there are no makers marks ,the blade is an 1/8th of an inch thick,3&1/8th inches long,it is all stainless steel with Ebony scales .
I don't think it is very good quality the cutting bevel was uneven 15Ëš & 19Ëš the blade appears to be slightly out of line and the Ebony scales could have been finished better.
I have sharpened it up although the primary bevel is not good near the heel of the knife I only noticed that when I finished there is a drop in the bevel near the heel .

So can anyone hazard a guess as to what it is ?
h5c42ca5.jpg


I would re sharpen it again to correct it if it was mine but it is good enough I finished it on 6000 grit tape. On my EP I am patiently waiting for my WE but quite happy to wait since Spain is on a go slow in August (especially Customs) and there are so many new additions coming for the WE so a delay is good I have ordered most of the new additions .
The administrator has disabled public write access.
Time to create page: 0.115 seconds