Welcome, Guest
Username: Password: Remember me

TOPIC: Sneak Peak

Re: Sneak Peak 1 year 4 months ago #10734

  • PhilipPasteur
  • PhilipPasteur's Avatar
  • OFFLINE
  • Platinum Boarder
  • Phil
  • Posts: 944
  • Thank you received: 233
  • Karma: 66
I will test for you Clay.
Phil

MAX 2001-2013
Hoping there is that bridge!
I miss you Buddy!
The administrator has disabled public write access.

Re: Sneak Peak 1 year 4 months ago #10735

  • PhilipPasteur
  • PhilipPasteur's Avatar
  • OFFLINE
  • Platinum Boarder
  • Phil
  • Posts: 944
  • Thank you received: 233
  • Karma: 66
Clay...
I could not see that in the photos. It looks like the extension is not centered in the vise...
But I will look again.
wickededge wrote:
PhilipPasteur wrote:
Hey Clay,

Would you offer some arms with a greater lenght than the current ball joint arms at some point?
Maybe a kit? Looks interesting.

Yes, I think we would offer those, would be easy to do.
PhilipPasteur wrote:
Is there a reason you have the accessory clamped up so that it is not even, front to back, in the stock jaws?

I wonder if some ridges or maybe a notch could be put on the extension where it sits in the vise to allow the stock jaws to fit inside and center it relative to the stock vise? I know that the more machining required... or additional stock thickness, just would make the device more expensive...

I'm not exactly sure what you mean here (might be because I've spent the last three hours reading through 50 pages of patent docs and accompanying figures and my mind is numb.) The extension slips inside of the stock jaws and is notched to fit in the same way every time, resting on the top of the stock jaws. The extension is machined in such a way that the center-line of the extension clamp is in the same plane as the center-line of the stock clamp. Is this what you're asking about?
Phil

MAX 2001-2013
Hoping there is that bridge!
I miss you Buddy!
The administrator has disabled public write access.

Re: Sneak Peak 1 year 4 months ago #10736

  • wickededge
  • wickededge's Avatar
  • OFFLINE
  • Administrator
  • Posts: 1779
  • Thank you received: 640
  • Karma: 91
PhilipPasteur wrote:
I will test for you Clay.

I hoped you might :)
--Clay Allison
The administrator has disabled public write access.

Re: Sneak Peak 1 year 4 months ago #10737

  • wickededge
  • wickededge's Avatar
  • OFFLINE
  • Administrator
  • Posts: 1779
  • Thank you received: 640
  • Karma: 91
PhilipPasteur wrote:
Clay...
I could not see that in the photos. It looks like the extension is not centered in the vise...
But I will look again.

Yes, the photos are terrible quality, hard to see much detail at all.
--Clay Allison
The administrator has disabled public write access.

Re: Sneak Peak 1 year 4 months ago #10738

  • razoredgeknives
  • razoredgeknives's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 789
  • Thank you received: 366
  • Karma: 39
I would also be willing to test one out for you clay... I already have some longer arms so I can sharpen longer blades and see how it holds up :-)
The administrator has disabled public write access.

Re: Sneak Peak 1 year 4 months ago #10739

  • wickededge
  • wickededge's Avatar
  • OFFLINE
  • Administrator
  • Posts: 1779
  • Thank you received: 640
  • Karma: 91
razoredgeknives wrote:
I would also be willing to test one out for you clay... I already have some longer arms so I can sharpen longer blades and see how it holds up :-)

That would be great. Please send an email with your address and I'll get one out to you.
--Clay Allison
The administrator has disabled public write access.

Re: Sneak Peak 1 year 4 months ago #10740

  • wickededge
  • wickededge's Avatar
  • OFFLINE
  • Administrator
  • Posts: 1779
  • Thank you received: 640
  • Karma: 91
PhilipPasteur wrote:
I will test for you Clay.

Phil, please send an email with your address and I'll get one out to you.
--Clay Allison
The administrator has disabled public write access.

Re: Sneak Peak 1 year 4 months ago #10741

  • KenBuzbee
  • KenBuzbee's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 397
  • Thank you received: 110
  • Karma: 22
wickededge wrote:
razoredgeknives wrote:
Love it! My only concern is that the extension vise will bend at the top... This has been an issue in the past with the regular jaws, but this looks thinner... How does it seem to hold up clay?

I haven't done extensive testing yet but haven't run into any problems so far. Any volunteers for testing and feedback?

Absolutely. I'll give it a go, Clay.

Ken
玉鋼
The administrator has disabled public write access.

Re: Sneak Peak 1 year 4 months ago #10742

  • wickededge
  • wickededge's Avatar
  • OFFLINE
  • Administrator
  • Posts: 1779
  • Thank you received: 640
  • Karma: 91
KenBuzbee wrote:

Absolutely. I'll give it a go, Clay.

Ken

Awesome! Please send an email with your address. :)
--Clay Allison
The administrator has disabled public write access.

Re: Sneak Peak 1 year 4 months ago #10743

  • KenBuzbee
  • KenBuzbee's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 397
  • Thank you received: 110
  • Karma: 22
wickededge wrote:
KenBuzbee wrote:

Absolutely. I'll give it a go, Clay.

Ken

Awesome! Please send an email with your address. :)

Email sent, Clay.

Thanks!

Ken
玉鋼
The administrator has disabled public write access.
The following user(s) said Thank You: wickededge
Time to create page: 0.136 seconds