The edges especially on the 1600 stones are completely uneven. I can feel it leaving deep scratches. Any ideas what can i do to fix that?

How old are they?

When you say uneven are they chipped or not level?

Can you post a pic?

Yup, please post a pic. We need a bit more information to see what is going on.

Welcome to the forum Vladimir...

You could try lightly lapping the stones together to see if that corrects it. If not, you could then try lapping them with the finest diamond stone you have. Go slow and check your work often to see what's happening.

The first one is the 1600. As you can c the both stones have completely different structure and i think you can see some of the problem on the edge.
The second one is the 1200 which is ok but I did not expect all these holes on the surface.

Mine were the same way. Just have to use them and they will be just fine. Only rub them together a little bit. They just have to break in and you will be fine.

Like Wayne, mine were the same to, look just like your photos.

VladimirSoskov wrote:


Feel it and see it?

Mine never looked like these, are these the new batch?

Mine were holes not raised or gravel like.

wickededgeusa.com/index.php?option=com_k...0&Itemid=63#7039

wickededgeusa.com/index.php?option=com_k...0&Itemid=63#6980

Probably the new batch as mine look just like his. I found myself catching the edge until I had a few blades on them and got them broken in a little better. Seems like the edges are pretty square so can be prone to catching if you get too sloppy with your angles. At least that seemed to be my issue...YMMV

The micro's have a bevel on the edge.

I have lost a whole corner on one now.
Not the one that cracked.

I'm hoping the new ones are sorted!