PhilipPasteur wrote:


I already know those answers Phil, also posted in another thread.

Now I see the pics from Clay, I can sleep tonight.

There is a big difference compared to the micro's as I also discussed in another thread.
I think it was to me that Clay talked about the kiln layer.
But I haven't seen anyone elses used stones, now I'm happy.

The classic "I'll show you mine, if you show me yours".

There can't be too many things left for me to ask?

cbwx34 wrote:


Pics or didn't happen mate?



It's an unexpected look, I never saw "smoke", but a few flying bits from the edges.



I have done a few strokes together on both, rubbed a lot with my thumb also.
Have an eraser on the way.
No water used yet, I've put my WEPS away while I wait for the new arms, so not a lot of use.
There is a shallow depression on one 1600, but can't feel it while sharpening.

Good to see you are showing as online now.

Thanks Clay and all who contributed. Seems to clear up any misconceptions about the question of whether or not the Super Fine was somehow an inferior stone due to manufacturing problems. Now the only question remaining is how well it actually smooths the scratches from the highest diamond stone as I transition from sharpening into actual polishing in real world terms. I can't wait to get mine to try them out.

I can't say it enough, I love this forum....

A random question here if I may?

Do people "rotate" their stones at roughly equal intervals?

Please define "rotate" in this context.
Not sure what you mean.

Phil

End for end.

Pull off, rotate 180, put back on.

Billabong wrote:


It's so funny that you would ask that question. I just now asked the same thing here...

wickededgeusa.com/index.php?option=com_k...d=6172&Itemid=63

So it goes to show that there really is no such thing as a dumb question here.

Scott

Yes, I was just reading that.

I remember my old Lansky would develop a big bow in the stone leaning to one side.
So I figured a direction change might be a good thing.
I've been doing it to all my stones until now.

As for "dumb" questions, in my experience, they are followed by silence.
I would rather know, than think I know.
I mean the experts are here right?

Something I have thought that it might be good to do, but have never done it... at least during a given sharpening session on one blade.

Between sessions, well I keep my stones in the original plastic bags and boxes. I use a specifc orientation so I can tell whic stone was on which side and what end was up. When I take the stones out to use them, I swap side to side and end for end. As long as I am careful to follow my system they get rotated sufficiently for my purposes.


OTH, if you lap the stones with the proper regularity, this shouldn't be an issue.

www.wickededgeusa.com/index.php?option=c...d=2524&Itemid=63


This is for the waterstones and strops. I have never worried about the diamond plates, though I bet just through the random process of grabbing them from the box and using them, they get rotated occasionally.

This is what I do, I have no idea whether it is the "RIGHT" way to do this.

Phil


Billabong wrote:

So, what are the answers, and what other thread. I just ordered the superfine and microfine stones...I am curious!!

PhilBillabong wrote: