Welcome, Guest
Username: Password: Remember me

TOPIC: Stock stone/strop progression (Lots of Pics!!)

Re: Stock stone/strop progression 2 years 7 months ago #2051

  • wickededge
  • wickededge's Avatar
  • NOW ONLINE
  • Administrator
  • Posts: 1858
  • Thank you received: 691
  • Karma: 93
At this point, I took a detour to examine a technique a customer had been telling me about and had written about in Blade Forums. He has been jumping straight from the 600 grit diamond stones to the 14 micron strops. I followed that path for a while with the following progression: 600#> 14µ> 10µ> 5µ> 3.5µ

14MicronStropsafter600Grit-20Passes.jpg

I started with just 20 passes per side on the 14µ strops

14MicronStropsafter600Grit-100Passes.jpg

An additional 80 passes per side

14MicronStropsafter600Grit-200Passes.jpg

An additional 100 passes per side

10MicronStropsafter14MicronStrops-50Passes.jpg

10µ strops - 50 passes per side

5MicronStropsafter10MicronStrops-50Passes.jpg

5µ strops - 50 passes per side

3.5MicronStropsafter5MicronStrops-50Passes.jpg

3.5µ - 50 passes per side
--Clay Allison
The administrator has disabled public write access.

Re: Stock stone/strop progression 2 years 7 months ago #2052

  • razoredgeknives
  • razoredgeknives's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 860
  • Thank you received: 423
  • Karma: 41
when you get to the higher levels, are you going to be alternating stroke directions?
The administrator has disabled public write access.

Re: Stock stone/strop progression 2 years 7 months ago #2053

  • razoredgeknives
  • razoredgeknives's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 860
  • Thank you received: 423
  • Karma: 41
it must be because it is a softer steel.... because even after the 1k stones and going to the 14m paste, i did around 800 strokes per side and could still see the scratches left from the 1k with the naked eye...
The administrator has disabled public write access.

Re: Stock stone/strop progression 2 years 7 months ago #2054

  • wickededge
  • wickededge's Avatar
  • NOW ONLINE
  • Administrator
  • Posts: 1858
  • Thank you received: 691
  • Karma: 93
razoredgeknives wrote:
when you get to the higher levels, are you going to be alternating stroke directions?

In the next phase, I dropped back to the 600 grit stones and then progress up through the 800, 1000, 1200 and 1600 grit stones before using the strops again.
--Clay Allison
The administrator has disabled public write access.
The following user(s) said Thank You: razoredgeknives

Re: Stock stone/strop progression 2 years 7 months ago #2055

  • razoredgeknives
  • razoredgeknives's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 860
  • Thank you received: 423
  • Karma: 41
wickededge wrote:
razoredgeknives wrote:
when you get to the higher levels, are you going to be alternating stroke directions?

In the next phase, I dropped back to the 600 grit stones and then progress up through the 800, 1000, 1200 and 1600 grit stones before using the strops again.

Sweet! I can't wait to see the results... so when you refer to "split grain" leather, what are you talking about? just the smooth side out? from what I have read, split grain is much harder than the full grain, is this true?
The administrator has disabled public write access.

Re: Stock stone/strop progression 2 years 7 months ago #2059

  • wickededge
  • wickededge's Avatar
  • NOW ONLINE
  • Administrator
  • Posts: 1858
  • Thank you received: 691
  • Karma: 93
After my little detour around stropping straight from the 600 grit stones, I wanted to get back on track, so I went back to the 600 grit diamond stones for 20 strokes per side:

Attachment 600Grit-2ndRound-After3.5MicronStrops.jpg not found



Next were the 800 grit diamond stones, also 20 strokes per side:

Attachment 800Gritafter600Grit.jpg not found



And finally the 1000 grit diamond stones, also 20 strokes per side:

Attachment 1000Gritafter800Grit.jpg not found

--Clay Allison
The administrator has disabled public write access.
Time to create page: 0.146 seconds