Welcome, Guest
Username: Password: Remember me
This is the optional forum header for the Suggestion Box.

TOPIC: Strop micron order?

Strop micron order? 2 years 1 week ago #5833

  • KellyCurtis
  • KellyCurtis's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 10
  • Thank you received: 3
  • Karma: 2
Is there a posting of the strops and paste in order from largest to finest? As well as paste/strop material? I know there is a lot of numbers being thrown around and I loose track of what is rougher or what is finer than the next. For instance, will you get a more polished edge with a balsa, nano fiber, kangaroo, or leather strop with the same paste? I'd love to have a visual data sheet of all of the items available from WE in order so I don't accidentally grab the wrong paddles and take a step backwards. Hey, I'm getting old and need visual info instead of numbers! :S For instance, I just ordered some random balsa strops and paste to add to the collection, and I'm sure I can sort out easy enough what will cut harder than the rest or what will give more of a polish, but to be able to see a list would make me have to think less. Thanks.
Guilty as charged!
The administrator has disabled public write access.

Re: Strop micron order? 2 years 1 week ago #5846

  • BobNash
  • BobNash's Avatar
  • OFFLINE
  • Gold Boarder
  • Posts: 165
  • Thank you received: 63
  • Karma: 84
Welcome to the forum! Great question -
Clay had a photo page showing micro photos of each grit - and they were in order. Can't find it now but I'll keep looking. Anyone else have that link? Last I had seen it, it didn't yet have comparisons of the same grit on different substrates though.
When you move into the various polishing compounds they will be measured in microns or nanometers - larger the number, coarser the grit (exactly the opposite of the stones) - so move from big numbers to smaller. In my experience the effect of the applied compound gets more pronounced in this order - balsa, leather, roo, nano (that is with leather and balsa the substrate has a larger effect on the metal and nano has the least).
I haven't compared much to determine what order gives the best polish at the same grit and this could turn into a huge debate but I think it would go balsa, nano, leather, roo - i.e. roo is the best. I'm not really committed to that order on the middle two though as I've only really used the nano at 0.25 and smaller, but since the leathers burnish much more I put them in position 3 and 4 - I don't think there is much debate about roo as the best with most folk's experience so far.
Of course generally you are going to use the nano and roo to best effect below 0.5 micron IMO and you aren't going to use balsa at those finer grits so the comparison is really just between the leathers and the nano and I'm not sure at that level of polish my old eyes can see much difference (though the microscope can).
Thoughts from others?
Some of the edges I've sharpened on the WE
www.oldawan.com
This email address is being protected from spambots. You need JavaScript enabled to view it.
505-570-2040 (mobile and office)
The administrator has disabled public write access.
The following user(s) said Thank You: WayneNicklin

Re: Strop micron order? 2 years 1 week ago #5847

  • BobNash
  • BobNash's Avatar
  • OFFLINE
  • Gold Boarder
  • Posts: 165
  • Thank you received: 63
  • Karma: 84
PS - I didn't mention that you can back up in grits when stropping without noticing much detriment, in fact sometimes it give you better results even. So don't worry too much about going backwards and then working your way back down through the grits. Someone correct me if I am remembering this wrong but I think Clay has taken to going to 0.125 on the nano and them following it with 0.25 on roo when he is cleaning the edge for his studies.
Some of the edges I've sharpened on the WE
www.oldawan.com
This email address is being protected from spambots. You need JavaScript enabled to view it.
505-570-2040 (mobile and office)
The administrator has disabled public write access.
The following user(s) said Thank You: WayneNicklin

Re: Strop micron order? 2 years 1 week ago #5849

  • Billabong
  • Billabong's Avatar
  • OFFLINE
  • Banned
  • Posts: 355
  • Thank you received: 49
  • Karma: 44
BobNash wrote:
Welcome to the forum! Great question -
Clay had a photo page showing micro photos of each grit - and they were in order. Can't find it now

Down the bottom Bob. (Popular Links)

wickededgeusa.com/index.php?option=com_c...31:general&Itemid=46
Last Edit: 2 years 1 week ago by Billabong.
The administrator has disabled public write access.

Re: Strop micron order? 2 years 1 week ago #5851

  • ApexGS
  • ApexGS's Avatar
  • OFFLINE
  • Gold Boarder
  • Posts: 163
  • Thank you received: 51
  • Karma: 18
I think you're right, Bob. It's pretty interesting to see the difference just the substrate material makes. On the topic of backing up, I end up doing it a lot on oddly shaped blades or when I'm working right next to serrations on cheap knives where the grind tends to trail off a bit. The big thing is to try and get all of the scratches from the prior grit out as best as you can. It definitely doesn't hurt to back up, just spends a little extra time if it didn't really need it :)
Your friendly neighborhood gunsmith!
- Tom
The administrator has disabled public write access.

Re: Strop micron order? 2 years 1 week ago #5861

  • KellyCurtis
  • KellyCurtis's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 10
  • Thank you received: 3
  • Karma: 2
Thanks for the info, guys. So many stones, so many strops, so many tubes of pastes, and not enough time in the day! With just the basic pro pack 1 and one evening I am extremely impressed at my results. My other strops and paste should be here by friday giving me all weekend to mess with my WE. As a suggestion for marketing, I'd still do a list from the roughest stones to the finest paste/stop combo. Plus it would give me a clear list of where my money will be going!
Guilty as charged!
The administrator has disabled public write access.
Time to create page: 0.155 seconds