Welcome, Guest
Username: Password: Remember me
This is the optional forum header for the Suggestion Box.

TOPIC: Low Angle Accessory

Re: Low Angle Accessory 1 year 11 months ago #4252

  • mamun1024
  • mamun1024's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 12
  • Thank you received: 1
  • Karma: 4
Bump for an update.

I REALLY REALLY REALLY, REALLY need to get 10° angle for some of my favorite blades. Clay, please don't forget about this.
The administrator has disabled public write access.
The following user(s) said Thank You: Salguod

Re: Low Angle Accessory 1 year 11 months ago #4253

  • wickededge
  • wickededge's Avatar
  • OFFLINE
  • Administrator
  • Posts: 1752
  • Thank you received: 598
  • Karma: 91
I'm actively working on it!
MonteAhmed wrote:
Bump for an update.

I REALLY REALLY REALLY, REALLY need to get 10° angle for some of my favorite blades. Clay, please don't forget about this.
--Clay Allison
The administrator has disabled public write access.
The following user(s) said Thank You: mamun1024

Re: Low Angle Accessory 1 year 11 months ago #4259

  • KenBuzbee
  • KenBuzbee's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 397
  • Thank you received: 110
  • Karma: 22
wickededge wrote:
I'm actively working on it!

Thank you!

Ken
玉鋼
The administrator has disabled public write access.

Re: Low Angle Accessory 1 year 11 months ago #4260

  • Salguod
  • Salguod's Avatar
  • OFFLINE
  • Senior Boarder
  • Posts: 46
  • Thank you received: 7
  • Karma: 8
Me too! I hope the low angle accessory comes out soon!

Doug
The administrator has disabled public write access.

Re: Low Angle Accessory 1 year 11 months ago #4265

  • BassLakeDan
  • BassLakeDan's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 121
  • Thank you received: 28
  • Karma: 19
B) ...:P ..
well, of course, this is not what you guys really have in mind, but I did rig this up out of some old steel foundation straps.. Doesn't work too bad for resharpening your old utility box knifes ! Actually, I was working on this blade for a reason, and if it goes well I will fill in the missing details later.

The administrator has disabled public write access.

Re: Low Angle Accessory 1 year 11 months ago #4268

  • KenBuzbee
  • KenBuzbee's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 397
  • Thank you received: 110
  • Karma: 22
Nice Dan. I was wondering about this exact kind of thing. My thoughts were two metal plates with four tapped holes each. Bolt them to the alignment holes in the jaws. Might need a shim between them for stability (about the thickness of the blade) Insert the blade, lightly tighten the top screw, insert the shim and tighten the bottom screw. Seemed like it would work.

I'll be interested in updates to our "project"

Ken
玉鋼
The administrator has disabled public write access.
Time to create page: 0.128 seconds