Manufacturer Model Blade Length Thickness Steel Hardness Recommended Angle Recommended Finish Depth AlignmentIntent
Strider SnG 3.5 .165 S30V Unknown 24 Degree Bevel with 26 Degree Stropping (Widen arms for Stropping) 600 Grit Bevel, 10 Micron Stropping Top. B.8 Tactical
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author:
Rating:
1
Rating:
1
Rating:
1
Rating:
1
Rating:
1
Benchmade Mini-Griptilian - Doug Ritter 2.88 .1 S30V 62 22 1600 Ceramic Bottom A.5
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: guest
Rating:
Rating:
Rating:
Rating:
Rating:
Gerber Freeman Drop Point 3.5" .134" S30V 56-58RHC 20 3.5um Bottom A.5 Field Dressing, Skinning
 
Authors Comments:This is a stout knife but doesn't hold an edge like I'd expect from the steel. I initially tried it at 17 degrees but had to go back to 20 to get it to last for an elk or two.
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author:
Rating:
1
Rating:
1
Rating:
1
Rating:
1
Rating:
1
Strider GW/AR152 8" .250 S30V unknown 25 3.5 micron Bottom C OCONUS deployment
 
Authors Comments:I'll check the hardness when I see the knife again
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author:
Rating:
1
Rating:
1
Rating:
1
Rating:
1
Rating:
1
Spyderco Native 3 1/16" 1/8" S30V 59-60 HRC 18 deg. Micro Fine Fine Top A 3/4 EDC
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: cbwx34
Rating:
Rating:
Rating:
Rating:
Rating:
Buck Vantage Pro 3.25" 0.120" S30V 59 18 1k diamond, with strops for touch up Top B EDC
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: ApexGS
Rating:
Rating:
Rating:
Rating:
Rating:
Benchmade 940 3.4 0.12 S30V 58-60 15 10k chosera, 0.5 strop Top B.5 (thumb studs) EDC
 
Authors Comments:Aligned thumb studs to vice, about B.5. See photos in URL.
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: Geocyclist
Rating:
Rating:
Rating:
Rating:
Rating:
Zero Tolerance zt0350 3 1/4 .121 S30V Unk 20 deg. MicroFine-Fine Bottom B EDC
 
Authors Comments:MicroFine finish after 600g diamond stone
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: cbwx34
Rating:
Rating:
Rating:
Rating:
Rating:
Zero Tolerance 0700 3.375" Unknown S30V Unknown 14.5 As Measured (15 Degree Slot) 3u Balsa 1u 3M PSA Tape (200 Passes Each) Top B.0 EDC / Boxes / Paper
 
Authors Comments:Tape thumb studs because stones may rub them. S30V is some hard steel!. Great Tanto Shape. My Favorite Blade!
Angle/Finish Tried with Ratings
Setting 1:
14.5 EDC / Paper / Boxes with Mirror Bevel

Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: EatingPie
Rating:
10
Rating:
Rating:
Rating:
Rating:
Chris Reeve Large Sebenza 3.625" 0125" S35VN 58-59 RC 17 Deg. with 18 Deg. Microbevel 17 Deg. finished at 3.5u Strop Top Holes A.5
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
17 degree main bevel 18,19,20,21 micro for convex

Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author:
Rating:
9
Rating:
Rating:
Rating:
Rating:


Page 13 of 18 Results 121 - 130 of 172