Manufacturer Model Blade Length Thickness Steel Hardness Recommended Angle Recommended Finish Depth AlignmentIntent
Heckles Professional S paring 4 inches ? "High carb stainless ? 17.8 ? Above upper holes B Kitchen
 
Authors Comments:Diamond: 600 to 1000. Ceramic:1200 to 0.6 mic. Final: naniwa 8k
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: Mikedoh
Rating:
Rating:
Rating:
Rating:
Rating:
Becker BK16 4.375 0.165 1095 56-58 20 1600 Bottom. B 0.5
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author:
Rating:
1
Rating:
1
Rating:
1
Rating:
1
Rating:
1
ESEE Laser Strike 4.75" .1875" 1095 55-57RC 19A 10um Strop after 600# Diamond Stone Bottom B.5 Bushcraft, Survival, Camping
 
Authors Comments:I haven't tested the edge of this blade yet, will do some cutting and experimenting before fully commenting.
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: wickededge
Rating:
10
Rating:
10
Rating:
10
Rating:
10
Rating:
10
ESEE ESEE-5 5.45 inches .25 inches 1095 cabon steel 57 17-19-21 convexed ceramics then strops 5 and 3.5 pastes to integrate the shoulders top B-5 bushcraft and survival
 
Authors Comments:This knife is essentially a pry bar with a sharp edge. It is a beast developed to help downed helicopter pilots to escape from their wreckage. A great knife to carry around in your car for emergencies. LJM
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author:
Rating:
1
Rating:
1
Rating:
1
Rating:
1
Rating:
1
ESEE ESEE-6 6.5 inches 3/16th inch 1095 cabon steel 57 20 degrees- frighteningly sharp ceramics and strops with 5 and 3.5 micron pastes, I do a lot of stropping with green paste day to day and so I get a convexing to this edge over time Top C survival/bushcraft, a good slicer in the kitchen
 
Authors Comments: all the ESEE knives are full flat-ground and the blades vary in thickness from the spine to the edge, so they are good slicers but hard to mount in the vise.
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author:
Rating:
1
Rating:
1
Rating:
1
Rating:
1
Rating:
1
ESEE ESEE-4 4.5 inches 3/16th inch 1095 carbon 57 22 degrees ceramics and strops with 5 and 3.5 micron pastes, I do a lot of stropping with green paste day to day and so I get a convexing to this edge over time top B.75 bushcraft and survival
 
Authors Comments:a stout and very sharp edge, takes abuse well- LJM
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author:
Rating:
1
Rating:
1
Rating:
1
Rating:
1
Rating:
1
ESEE Laser Strike 5 inches 3/16th inch 1095 Carbon steel 57 20 degrees ceramics and strops 5 and 3.5 diamond paste Top B.75 survival and bushcraft
 
Authors Comments:a spear-point blade with a skeletonized handle so the knife can be made into a spear for survival LJM
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author:
Rating:
1
Rating:
1
Rating:
1
Rating:
1
Rating:
1
ESEE Izula 2 5/8" .156" 1095 Carbon Steel 57 20 Degrees Diamonds, Ceramics, then Strops to .5 micon Top A.25 Bushcraft/Survival
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: 4jlcc
Rating:
Rating:
Rating:
Rating:
Rating:
Kabar Becker bk2 (new model) 5-1/4" 0.250 1095 Cro-Van 56-58 HRC 20 degrees 3.5um Bottom. B.5
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author:
Rating:
1
Rating:
1
Rating:
1
Rating:
1
Rating:
1
Kershaw Needs Work 3" forgot to measure 12C26 stainless 58 15 1600 diamond and hand stropped with green rouge top A.5 EDC
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: xuzme720
Rating:
Rating:
Rating:
Rating:
Rating:


Page 1 of 18 Results 1 - 10 of 172