Manufacturer Model Blade Length Thickness Steel Hardness Recommended Angle Recommended Finish Depth AlignmentIntent
Anders Petter Chef knife 200 mm 2 mm Molybdenum Stainless 57 22 0.6 um micro fine B D.0 Kitchen use
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: johpe
Rating:
Rating:
Rating:
Rating:
Rating:
Peter Altenbach Chefs Knife 10" 3mm X45CrMoV15 ? 20 2k Chosera Bottom E Chopping and Slicing
 
Authors Comments:I've had this knife for over 24 years and have used it regularly. The steel isn't spectacular and really doesn't hold up well below 20 degrees. I like the shoulders polished and the edge just a little toothy. -Clay Allison
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author:
Rating:
1
Rating:
1
Rating:
1
Rating:
1
Rating:
1
Wusthof Classic 10" Slicer 10" .110 X50CrMo14 56-57 RHC 20 1k-1.6k Top C General purpose kitchen utility, cuts lots of vegg
 
Authors Comments:I'd love to go more acute than 20 degrees but the edge just won't hold long enough. I keep it just a little toothy to compensate and it performs well. This is my wife's favorite knife and she uses and abuses constantly.
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author:
Rating:
1
Rating:
1
Rating:
1
Rating:
1
Rating:
1
Emerson CQC-8 100 mm 3 mm 154CM? 57-59 23 1000# Diamond Bottom B Hard use survival / bushcraft
 
Authors Comments:This folder is from 2004 without wave. I have a V-grind on this one.
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: jolut
Rating:
Rating:
Rating:
Rating:
Rating:
Kershaw Cryo 1555TIX 2.75 inch ? 8Cr13MoV ? 22* per side Leather /c 0.5 mic diamond Upper A.5 Sons 1st interesting knives
 
Authors Comments:Diamond 800, 1000. Ceramic 1.4, 1200,1600. Naniwa 8k. Ceramic 0.6. Leather strops 1
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: Mikedoh
Rating:
Rating:
Rating:
Rating:
Rating:
Spyderco Delica 4 2.875" 2.5mm VG-10 N/A 20 degrees 3.5 micron strop Top A.5 EDC
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author:
Rating:
1
Rating:
1
Rating:
1
Rating:
1
Rating:
1
Spyderco Delica 4 2.88 0.093 ZDP-189 64 17, Mirco 20 3.5 um @19 Top A.5 EDC
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: TPeters
Rating:
Rating:
Rating:
Rating:
Rating:
Shun DM-0500 8" ? VG10 61 16 3.5um Bottom D Chopping, slicing, general cooking
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: wickededge
Rating:
Rating:
Rating:
Rating:
Rating:
Shun DM-0516 Ken Onion Paring Knife 3" ? VG10 61 16 3.5um Top B Cooking, paring
 
Authors Comments:Set spine on the pin closest to me and then rotated the edge to horizontal.
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: wickededge
Rating:
Rating:
Rating:
Rating:
Rating:
Kai Shun DM-0706 200mm 1mm VG-10 61 ± 1 HRC 16 0.5 um leather strop Bottom D.0 Misc kitchen use
 
Authors Comments:Refined the factory (16 degrees) edge, got scary sharp and passed HHT.
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: johpe
Rating:
Rating:
Rating:
Rating:
Rating:


Page 5 of 17 Results 41 - 50 of 168