Manufacturer Model Blade Length Thickness Steel Hardness Recommended Angle Recommended Finish Depth AlignmentIntent
Chambriard Thier FR Le Trappeur folder 3.7 inches .118 inches 13C26 SS 57 16.5 degrees ceramics and strops 5 and 3.5 diamond paste Top B.3 Gentleman's knife/hunter too, cuts like a laser
 
Authors Comments:This is a sturdy knife meant as an EDC for use at the dining room table, kitchen or campsite. One could use it for dressing game but the cleaning would be difficult. L.J.M.
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author:
Rating:
1
Rating:
1
Rating:
1
Rating:
1
Rating:
1
Camillus 18671 3 in. .120 in. VG-10 Unk. 21 deg. 10m leather (just a light strop) Top A 1/2 EDC
 
Authors Comments:Blade has a "Carbonitride Titanium" coating, which the manufacturer claims makes it "10x harder". Anyway, my intent was to match the original bevel, but at 25 deg. I was still hitting near the shoulder, so decided to stop at 25. Blade came out sharp, but would probably benefit from a lower angle. 2/16/13 EDIT: I resharpened this knife, and when I set the bevel, it matched at 21 deg. I don't know why the difference from the previous 25 deg. but thought I'd document the difference.
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author:
Rating:
Rating:
Rating:
Rating:
Rating:
Buck# 223 6.375 .077 420J2 49-53 18 1000 Top C.5 Filet Knife
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: TPeters
Rating:
Rating:
Rating:
Rating:
Rating:
Buck Protege 450T 3" .1 420HC 58-61 18, 20 Micro 3.5 um@18, 1000@20 Top B Hunting
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: TPeters
Rating:
Rating:
Rating:
Rating:
Rating:
Buck Ranger 110 3.75" .1 420HC 58-61 19, 20 Micro 3.5 um@19, 1000@20 Top B.5 Field Dressing Game
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: TPeters
Rating:
Rating:
Rating:
Rating:
Rating:
Buck 112 3" .077 420HC 58-61 18, 20 Micro 3.5 um@18, 1600@20 Top B Field Dressing Game
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: guest
Rating:
Rating:
Rating:
Rating:
Rating:
Buck Vantage Pro 3.25" 0.120" S30V 59 18 1k diamond, with strops for touch up Top B EDC
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: ApexGS
Rating:
Rating:
Rating:
Rating:
Rating:
Buck Zipper. 191 4 1/8 inch 0.14 inch 420HC ? 18/side. Leather strop 1mic Upper B.5 Skinning fixed blade
 
Authors Comments:Buck states factory angles are 13-16/side. This was closer to 18/side. Diamond 400 - 1000. Ceramic 1.4 then leather strops as noted in finish.
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: Mikedoh
Rating:
Rating:
Rating:
Rating:
Rating:
Buck Metro (759) 1" ? 420HC ? 17 1000# daniel, a few light cleanup passes with 5um leather See comments A.5 EDC
 
Authors Comments:Clamp on the bottle opener ring, the aluminum body section will control depth. Align to A.5 and level out the little blade with the clamp as best you can! Works surprisingly well.
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: ApexGS
Rating:
Rating:
Rating:
Rating:
Rating:
Buck Alpha Hunter 3.5" ? 420HC ? 17 1000# diamond, a few light cleanup passes with 5um leather Bottom B Hunting
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: ApexGS
Rating:
Rating:
Rating:
Rating:
Rating:


Page 14 of 18 Results 131 - 140 of 172