Manufacturer Model Blade Length Thickness Steel Hardness Recommended Angle Recommended Finish Depth AlignmentIntent
ESEE Izula 2 5/8" .156" 1095 Carbon Steel 57 20 Degrees Diamonds, Ceramics, then Strops to .5 micon Top A.25 Bushcraft/Survival
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: 4jlcc
Rating:
Rating:
Rating:
Rating:
Rating:
Spyderco Leaf Storm 2.125" .125" CPMS30V unknown 15 1000 Grit Short Short, very short Pocket knife
 
Authors Comments:NA
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author:
Rating:
1
Rating:
1
Rating:
1
Rating:
1
Rating:
1
Kershaw Onion scallion # 1620 2.25 inches ? 420HC ? 20.3* 0.6 mic ceramic then strop 0.5 micron diamon paste on leather Upper holes A.5 EDC
 
Authors Comments:Kershaw states normal sharpening angles are 20* -22* for their knives
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: Mikedoh
Rating:
Rating:
Rating:
Rating:
Rating:
Spyderco Ambitious 2.25" 0.125" 8Cr13MoV HRC 58-59 15 0.5um 1st A.5 EDC
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: MartinL1
Rating:
Rating:
Rating:
Rating:
Rating:
Kabar 1100 stockman pocket knife 2.5 inch ? ? ? 21.75 Ceramic 0.6 micron Above upper holes A.5 Toolbox
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: Mikedoh
Rating:
Rating:
Rating:
Rating:
Rating:
Cold Steel Old small folder 2.5 inches ? San Mai 3 ? 56-58 HRC ? 18.4* 0.6 mic ceramic Upper holes A.5 EDC
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: Mikedoh
Rating:
Rating:
Rating:
Rating:
Rating:
SOG Twitch II 2.68" .1" AUS-8 HRC 57-58 22 3.5u Top A.5
 
Authors Comments:My progression was 800 to 1600 ceramics. Then 14, 10, 5, 3.5u strops. 100 strokes with each strop then would flip strops end for end at 50 so the whole strop would get worn evenly
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: wickededge
Rating:
Rating:
Rating:
Rating:
Rating:
Cutco 2 3/4" paring Item # 1720 2.75 - 440A - 17 1000# then 5-3.5 leather strops spine only in vice A.5 kitchen, general use
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
A.5, 17 deg.

Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: Geocyclist
Rating:
7
Rating:
Rating:
Rating:
Rating:
Kershaw Cryo 1555TIX 2.75 inch ? 8Cr13MoV ? 22* per side Leather /c 0.5 mic diamond Upper A.5 Sons 1st interesting knives
 
Authors Comments:Diamond 800, 1000. Ceramic 1.4, 1200,1600. Naniwa 8k. Ceramic 0.6. Leather strops 1
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: Mikedoh
Rating:
Rating:
Rating:
Rating:
Rating:
Spyderco Persistence 2.75" 0.125" 8Cr13MoV HRC 58-59 15 0.5um 1st B EDC
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: MartinL1
Rating:
Rating:
Rating:
Rating:
Rating:


Page 3 of 17 Results 21 - 30 of 168