Knife Database
   
⇔ Manufacturer ⇔ Model ⇔ Blade Length ⇔ Thickness ⇔ Steel ⇔ Hardness ⇔ Recommended Angle ⇔ Recommended Finish ⇔ Depth ⇔ Alignment⇔ Intent
Strider GW/AR152 8" .250 S30V unknown 25 3.5 micron Bottom C OCONUS deployment
 
Authors Comments:I'll check the hardness when I see the knife again
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author:
Rating:
1		 Rating:
1		 Rating:
1		 Rating:
1		 Rating:
1
Spyderco Native 3 1/16" 1/8" S30V 59-60 HRC 18 deg. Micro Fine Fine Top A 3/4 EDC
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author: cbwx34
Rating:
 Rating:
 Rating:
 Rating:
 Rating:
Buck Vantage Pro 3.25" 0.120" S30V 59 18 1k diamond, with strops for touch up Top B EDC
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author: ApexGS
Rating:
 Rating:
 Rating:
 Rating:
 Rating:
Benchmade 940 3.4 0.12 S30V 58-60 15 10k chosera, 0.5 strop Top B.5 (thumb studs) EDC
 
Authors Comments:Aligned thumb studs to vice, about B.5. See photos in URL.
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author: Geocyclist
Rating:
 Rating:
 Rating:
 Rating:
 Rating:
Zero Tolerance zt0350 3 1/4 .121 S30V Unk 20 deg. MicroFine-Fine Bottom B EDC
 
Authors Comments:MicroFine finish after 600g diamond stone
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author: cbwx34
Rating:
 Rating:
 Rating:
 Rating:
 Rating:
Zero Tolerance 0700 3.375" Unknown S30V Unknown 14.5 As Measured (15 Degree Slot) 3u Balsa 1u 3M PSA Tape (200 Passes Each) Top B.0 EDC / Boxes / Paper
 
Authors Comments:Tape thumb studs because stones may rub them. S30V is some hard steel!. Great Tanto Shape. My Favorite Blade!
Angle/Finish Tried with Ratings
Setting 1:
14.5 EDC / Paper / Boxes with Mirror Bevel
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author: EatingPie
Rating:
10		 Rating:
 Rating:
 Rating:
 Rating:
Benchmade 470 Emissary 3 0.09 S30V 58-60 20 10K Chosera Top A 0.75
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author: mark76
Rating:
 Rating:
 Rating:
 Rating:
 Rating:
Kershaw Blur 3.375 0.125 S30V 58-60 20 5K Chosera Bottom B
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author: mark76
Rating:
 Rating:
 Rating:
 Rating:
 Rating:
Chris Reeve Large Sebenza 3.625" 0125" S35VN 58-59 RC 17 Deg. with 18 Deg. Microbevel 17 Deg. finished at 3.5u Strop Top Holes A.5
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
17 degree main bevel 18,19,20,21 micro for convex

Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author:
Rating:
9		 Rating:
 Rating:
 Rating:
 Rating:
Chris Reeve Small Sebenza 2.94in 0.125in S35VN 58-59 RC 22 Degrees 3.5um Top A 1/2 EDC
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author: guest
Rating:
 Rating:
 Rating:
 Rating:
 Rating:

<< Start < Prev 11 12 13 14 15 16 17 18 19 Next > End >>
Page 14 of 19