Knife Database
   
⇔ Manufacturer ⇔ Model ⇔ Blade Length ⇔ Thickness ⇔ Steel ⇔ Hardness ⇔ Recommended Angle ⇔ Recommended Finish ⇔ Depth ⇔ Alignment⇔ Intent
ESEE ESEE-4 4.5 inches 3/16th inch 1095 carbon 57 22 degrees ceramics and strops with 5 and 3.5 micron pastes, I do a lot of stropping with green paste day to day and so I get a convexing to this edge over time top B.75 bushcraft and survival
 
Authors Comments:a stout and very sharp edge, takes abuse well- LJM
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author:
Rating:
1		 Rating:
1		 Rating:
1		 Rating:
1		 Rating:
1
Wusthof Multi prep cook's knife #4582 4.5 inch 0.09 inch X50 CrMoV15 58 HRC 20.10* per side Leather strop /c 0.5 diamond paste Upper holes B.5 Small cook prep knife
 
Authors Comments:Finished /c diamond 1000 and stopped with 1
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author: Mikedoh
Rating:
 Rating:
 Rating:
 Rating:
 Rating:
Becker BK16 4.375 0.165 1095 56-58 20 1600 Bottom. B 0.5
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author:
Rating:
1		 Rating:
1		 Rating:
1		 Rating:
1		 Rating:
1
Bark River Bravo 1 4.250 inches .215 inches A-2 tool steel 59 17 degrees ceramics and strops with 5 and 3.5 micron pastes, I do a lot of stropping with green paste day to day and so I get a convexing to this edge over time top B-5 survival/bushcraft/tactical
 
Authors Comments:LJM it originally came with a zero degree convex edge which I found was a bit too fine and subject to chipping and rolling; I love the 17 degree angle razor sharp and tough
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author:
Rating:
1		 Rating:
1		 Rating:
1		 Rating:
1		 Rating:
1
Cold Steel Kudu 4.25" 2 mm Krupp 4116 Stainless HRC 56-57 17 0.5um 1st B.5
 
Authors Comments:Shaving sharp and mirror polish after finishing with the 1/0.5um diamond spray on leather
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author: MartinL1
Rating:
 Rating:
 Rating:
 Rating:
 Rating:
Spyderco Police 4.125 .125 VG-10 Unknown 19 1000, 6 micron strop , 3 micron strop Top B
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author:
Rating:
1		 Rating:
1		 Rating:
1		 Rating:
1		 Rating:
1
Spyderco Military CF 4" .156" S90V unknown 15 3.5um Bottom. B.5
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author:
Rating:
1		 Rating:
1		 Rating:
1		 Rating:
1		 Rating:
1
Cold Steel Black Sable 4" .125" San Mai III 58 HRC 18 primary bevel, 19 degree micro bevel 1600# Top B.5 EDC
 
Authors Comments:I originally created the bevels at 18 degrees and polished them to .5 microns before adding a micro-bevel at 19 degrees with the 1600# ceramic stones to give a mirrored bevel and slightly reduced shoulder while making the actual edge a little wider and giving it some micro teeth.
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author: wickededge
Rating:
1		 Rating:
1		 Rating:
1		 Rating:
1		 Rating:
1
SOG Field Pup 4" .125" AUS-8 57-58HRC 20 1600# Top A.5 Field Dressing, Skinning
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author:
Rating:
1		 Rating:
1		 Rating:
1		 Rating:
1		 Rating:
1
J. A. Henckels Professional "S" 31020-100 Paring 4" 1.5mm X50CrMoV15 ? 20 3.5um Top B Paring
 
Authors Comments:The steel is not spectacular and while I'd like to go lower, it only really holds up at 20 degrees and up. I like to keep it fairly polished since I mostly push-cut with it. -Clay Allison
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author:
Rating:
1		 Rating:
1		 Rating:
1		 Rating:
1		 Rating:
1

<< Start < Prev 1 2 3 4 5 6 7 8 9 10 Next > End >>
Page 4 of 19