Knife Database
   
⇔ Manufacturer ⇔ Model ⇔ Blade Length ⇔ Thickness ⇔ Steel ⇔ Hardness ⇔ Recommended Angle ⇔ Recommended Finish ⇔ Depth ⇔ Alignment⇔ Intent
IKEA Chef knife 200 mm 2.2.mm Cheap stainless 54 22 0.6 um micro fine B D.0 Doing dirty work in the kitchen.
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author: johpe
Rating:
 Rating:
 Rating:
 Rating:
 Rating:
Anders Petter Chef knife 200 mm 2 mm Molybdenum Stainless 57 22 0.6 um micro fine B D.0 Kitchen use
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author: johpe
Rating:
 Rating:
 Rating:
 Rating:
 Rating:
Benchmade Presidio Ultra 2.97" 0.115" 440C Stainless Stee 58-60HRC 15.25 (Measured) 5u Balsa, 3u and 1u 3M PSA Strips (50 passes per side) Top A.5 EDC
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author: EatingPie
Rating:
 Rating:
 Rating:
 Rating:
 Rating:
Benchmade 525 Mini-Presidio - Axis Lock - Plain Edge 2.97 in .115 in 154CM 58-59 rc 20-22 Degrees/Side 3.5um Top. A.5
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author:
Rating:
1		 Rating:
1		 Rating:
1		 Rating:
1		 Rating:
1
Bradely Alias ii 2.95 .120 S30V Unknown 18 1000 Stones, 6 micron strop , 3 micron strop Top B
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author:
Rating:
1		 Rating:
1		 Rating:
1		 Rating:
1		 Rating:
1
Chris Reeve Small Sebenza 2.94in 0.125in S35VN 58-59 RC 22 Degrees 3.5um Top A 1/2 EDC
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author: guest
Rating:
 Rating:
 Rating:
 Rating:
 Rating:
Chris Reeve Small Sebenza 21 2.94" .125" S35VN Stainless Stee 58-59 RC 18 deg. with 19,20 deg. Micro bevel for convex 18 Deg finished with Roo Strop .125 CBN and blank Top Holes B EDC
 
Authors Comments:All angles set with Angle Cube, rechecked on each stone. Re-created 18 Degree bevel with Diamond 400 -1000, Ceramic 1200/1600 then 5000/10000 Chosera. With 5/10k Chosera reset angle to 20 , 19 then back to 18deg. to define convex. Continued with Balsa 20, 19 then 18deg. with .5 Microne paste Completed at 18deg finish with Roo with .125 Cubic Boron then blank Roo with a mist of alcohol. Shaving sharp and developing a nice mirror polish edge. Maintenance additional careful stropping will r
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author: JamesBell
Rating:
 Rating:
 Rating:
 Rating:
 Rating:
Benchmade 9500 Mini-Auto Stryker 2.9" .1" 154CM 58-60HRC 20 3.5um Top A.5 EDC
 
Authors Comments:I've experimented with this knife many dozens of times over the years. My conclusion is that the steel won't hold well under 20 degrees. It's important to treat the blade in two sections to preserve the tanto geometry. I don't recommend a convex edge because of the loss of some of the precision cutting. It's an excellent EDC, especially for any utility work.
Angle/Finish Tried with Ratings
Setting 1:
22 Degrees / 1000# Diamond
Setting 2:
15 Degrees / 3.5um
Setting 3:
15 Degrees Primary, 17 Degrees Micro / 3.5um
Setting 4:
17 Degrees Primary, 20 Degrees Micro / 3.5um
Setting 5:


 Author: wickededge
Rating:
7		 Rating:
4		 Rating:
6		 Rating:
8		 Rating:
1
Gerber Remix 2.9" .115 mystery Stainless unk L 16, R 17 Micro Fine Ceramic Stones .6micron top A .5 Utility beater/Test bed
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author: xuzme720
Rating:
 Rating:
 Rating:
 Rating:
 Rating:
Leatherman PST-original Leatherman multi-tool 2.9 inches ? 420 HC STAINLESS ? 20 1200 ceramic Above upper holes A.5 Multi tool/ anything goes
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
Setting 2:
Setting 3:
Setting 4:
Setting 5:


 Author: Mikedoh
Rating:
 Rating:
 Rating:
 Rating:
 Rating:

<< Start < Prev 11 12 13 14 15 16 17 18 19 20 Next > End >>
Page 15 of 20