Manufacturer Model Blade Length Thickness Steel Hardness Recommended Angle Recommended Finish Depth AlignmentIntent
Benchmade 522 Presidio Ultra - Pardue Axis Lock - Plain Edge 3.47 in .125 in 440C 58-60 rc 22 Degrees/Side 1000# Diamond / 1600# Ceramic / 10 Micron Strops Top A.5
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author:
Rating:
1
Rating:
1
Rating:
1
Rating:
1
Rating:
1
Benchmade 525 Mini-Presidio - Axis Lock - Plain Edge 2.97 in .115 in 154CM 58-59 rc 20-22 Degrees/Side 3.5um Top. A.5
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author:
Rating:
1
Rating:
1
Rating:
1
Rating:
1
Rating:
1
Benchmade Osborne 3.4" 0.115" S30V 58-60HRC 20 1000 Top A .5
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author:
Rating:
Rating:
Rating:
Rating:
Rating:
Benchmade Mini-Griptilian - Doug Ritter 2.88 .1 S30V 62 22 1600 Ceramic Bottom A.5
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: guest
Rating:
Rating:
Rating:
Rating:
Rating:
Benchmade 9500 Mini-Auto Stryker 2.9" .1" 154CM 58-60HRC 20 3.5um Top A.5 EDC
 
Authors Comments:I've experimented with this knife many dozens of times over the years. My conclusion is that the steel won't hold well under 20 degrees. It's important to treat the blade in two sections to preserve the tanto geometry. I don't recommend a convex edge because of the loss of some of the precision cutting. It's an excellent EDC, especially for any utility work.
Angle/Finish Tried with Ratings
Setting 1:
22 Degrees / 1000# Diamond

Setting 2:
15 Degrees / 3.5um

Setting 3:
15 Degrees Primary, 17 Degrees Micro / 3.5um

Setting 4:
17 Degrees Primary, 20 Degrees Micro / 3.5um

Setting 5:


Author: wickededge
Rating:
7
Rating:
4
Rating:
6
Rating:
8
Rating:
1
Benchmade 581 Barrage 3.60" .121" M390 60-62 17 deg. (measured) .5m Leather (although lightly stropped so not a mirror finish). Top B EDC
 
Authors Comments:1st time w/ M390 steel. Slightly lowered factory bevel and cleaned up the edge (came with a very rough finish). See how it holds up at this angle.
Angle/Finish Tried with Ratings
Setting 1:
A.5 and 17.5º

Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: cbwx34
Rating:
7
Rating:
Rating:
Rating:
Rating:
Benchmade 551 Griptilian 3.45" .115" 154CM 58-60HRC 18 deg. w/ 20 deg. microbevel 3.5m on Balsa Top B EDC
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: cbwx34
Rating:
Rating:
Rating:
Rating:
Rating:
Benchmade 553 Tanto 3.5 .115 154CM 59 18 .05 strop with a 1600 microbevel @22 top A5 EDC
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
18 degrees to .05 strop

Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: xuzme720
Rating:
8
Rating:
Rating:
Rating:
Rating:
Benchmade Emissary 470-1 3 inches 0.09 inches S30-v 58-60 HRC 21.75*. (? Factory?) Leather strop 0.5 mic Upper holes A.5 EDC
 
Authors Comments:Stone progression: diamond 1000; ceramic: 1.4, 1200, 1600. Superstone: 8k Naniwa. Ceramic 0.6. Leather strops /c 1 mic and 0.5 mic diamond paste. Tough steel. Not sure I'm settling on this.
Angle/Finish Tried with Ratings
Setting 1:


Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: Mikedoh
Rating:
Rating:
Rating:
Rating:
Rating:
Benchmade 556 Mini Griptilian 2.9 0.10 154 cm 58-61 17.5 10k chosera, 0.5 strop Top A.5 EDC
 
Authors Comments:
Angle/Finish Tried with Ratings
Setting 1:
17.5 deg.

Setting 2:


Setting 3:


Setting 4:


Setting 5:


Author: Geocyclist
Rating:
Rating:
Rating:
Rating:
Rating:


Page 1 of 2 Results 1 - 10 of 17