Print

Kershaw

1745

 
BladeLength
3 1/4 in.
Thickness
1/8 in.
Steel
14C28N
Hardness
Unk.
Angle
17-18 deg. 2ndry with 20 deg. primary
Finish
.625 Ceramic
Depth
Top
Alignment
B
Intent
EDC
User
Comments
Had a rough 17-18 deg. edge on it... Lightly used the 1000g diamond to clean up the edge, then finished by going thru ceramics to the .625m. Came out very sharp, with a nice little bite to it.
DiscussURL
Setting1Text
Setting2Text
Setting3Text
Setting4Text
Setting5Text
 

Back