Print

CRKT

M16-14T

 
BladeLength
3.875 inches
Thickness
0.14 inches
Steel
AUS 8
Hardness
58-59 HRC
Angle
19
Finish
Bead-Blast
Depth
Bottom
Alignment
A 0.5
Intent
EDC
User
JG
Comments
Chisel Ground Tanto. I focused on the primary side nocking the burr off the back side down to 400 grit. After 400 grit I sharpened all the way down to 3.5 micron leather strops. Holds a great edge for a long time under normal daily use.
DiscussURL
Setting1Text
18 degree, stropped to 3.5 microns, Very effective
Setting2Text
Setting3Text
Setting4Text
Setting5Text
 

» Back