Print

Chris Reeve

Small Sebenza 21

 
BladeLength
2.94"
Thickness
.125"
Steel
S35VN Stainless Stee
Hardness
58-59 RC
Angle
18 deg. with 19,20 deg. Micro bevel for convex
Finish
18 Deg finished with Roo Strop .125 CBN and blank
Depth
Top Holes
Alignment
B
Intent
EDC
User
JamesBell
Comments
All angles set with Angle Cube, rechecked on each stone. Re-created 18 Degree bevel with Diamond 400 -1000, Ceramic 1200/1600 then 5000/10000 Chosera. With 5/10k Chosera reset angle to 20 , 19 then back to 18deg. to define convex. Continued with Balsa 20, 19 then 18deg. with .5 Microne paste Completed at 18deg finish with Roo with .125 Cubic Boron then blank Roo with a mist of alcohol. Shaving sharp and developing a nice mirror polish edge. Maintenance additional careful stropping will r
DiscussURL
Setting1Text
Setting2Text
Setting3Text
Setting4Text
Setting5Text
 

Back