Welcome, Guest
Username: Password: Remember me

TOPIC: Mounting a curved spine?

Mounting a curved spine? 3 months 1 week ago #18031

  • thefitter
  • thefitter's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 8
  • Karma: 0
Complete rookie here...I searched but could not see how to mount a blade with a curved spine. I have several Beanchmades with slightly curved spines, no flat at all and I'm having trouble getting a even bevel.

Thanks
The administrator has disabled public write access.

Mounting a curved spine? 3 months 1 week ago #18032

  • Mikedoh
  • Mikedoh's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 474
  • Thank you received: 125
  • Karma: 17
Welcome to the forum.

This thread may help you out.

www.wickededgeusa.com/forum/10-advanced-...ce-to-get-sweet-spot
The administrator has disabled public write access.

Mounting a curved spine? 3 months 1 week ago #18033

  • mark76
  • mark76's Avatar
  • OFFLINE
  • Administrator
  • Posts: 1341
  • Thank you received: 464
  • Karma: 88
Welcome to the forum! Enjoy you WEPS!

I hope Mike's link helps you. I might add that even with curved a curved spine, it is usually possible to mount a knife in a flat way, or at least in a way such that the knife if stable and sharpening is repeatable. This is because the "thingy" that supports the knife in the vise has two pins.

If this doesn't help or if you have more questions, please don't hesitate to ask!
The administrator has disabled public write access.
Time to create page: 0.115 seconds