Welcome, Guest
Username: Password: Remember me
Sharpener and Accessory Maintenance

TOPIC: Micro-adjustments Mechanism Questions

Micro-adjustments Mechanism Questions 2 months 3 weeks ago #17929

  • mctrinket
  • mctrinket's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 11
  • Thank you received: 5
  • Karma: 3
I have the PP2 upgrade and I was just wondering how much the micro-adjustment is supposed to move the angle. Should it only alter the angle +/- .05 degrees or is it supposed to allow for more?

The reason I ask is mine used to allow up to a +/- .40 degree adjustment; but now it seems to have tightened up and I don't know if it's working as intended or if I got gunk in it.

I've been using the soapy sponge trick to keep the steel dust down and it may have gotten into the works on the micro-adjustment screws. Is it possible to take it apart and clean it? If there are any video tutorials out there anyone is aware of, please let me know. I was not able to find one.

Thank you.
The administrator has disabled public write access.

Micro-adjustments Mechanism Questions 2 months 3 weeks ago #17930

  • mctrinket
  • mctrinket's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 11
  • Thank you received: 5
  • Karma: 3
Okay, I think I figured it out. Cleaned out the gunk and sprayed it all down with some Tuff Glide and now it seems much more agreeable.

Lovin' my Wicked Edge!
Last Edit: 2 months 3 weeks ago by mctrinket.
The administrator has disabled public write access.
The following user(s) said Thank You: wickededge, razoredgeknives, mark76
Time to create page: 0.121 seconds