Welcome, Guest
Username: Password: Remember me

TOPIC: Flat ground blade?

Flat ground blade? 2 years 11 months ago #893

  • t76turbo
  • t76turbo's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 13
  • Thank you received: 1
  • Karma: 3
I know for a fact I read a thread with tips on sharpening flat ground blades but I cant remember where for the life of me. I searched but didnt find what I was looking for.

Can someone point me to the thread OR give feedback on how best to sharpen mount flat ground blades in the jaws?

I finally used about 7 layers of blue painters tape on the very upper edge of the jaws. But I wonder if there is a better way to do it. I ended up getting pretty good results on my Strider SMF tanto. But it was still a little off.
The administrator has disabled public write access.

Re: Flat ground blade? 2 years 11 months ago #894

  • gofly
  • gofly's Avatar
  • OFFLINE
  • Senior Boarder
  • Posts: 49
  • Thank you received: 6
  • Karma: 13
The double sided sticky tape that is about a 1/16 thick seems to work good too.

Lucky
Lucky
The administrator has disabled public write access.

Re: Flat ground blade? 2 years 11 months ago #910

  • johngilbert
  • johngilbert's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 12
  • Thank you received: 1
  • Karma: 3
t76turbo wrote:
I know for a fact I read a thread with tips on sharpening flat ground blades but I cant remember where for the life of me. I searched but didnt find what I was looking for.

Can someone point me to the thread OR give feedback on how best to sharpen mount flat ground blades in the jaws?

I finally used about 7 layers of blue painters tape on the very upper edge of the jaws. But I wonder if there is a better way to do it. I ended up getting pretty good results on my Strider SMF tanto. But it was still a little off.

Here you go:
www.wickededgeusa.com/index.php?option=c...31:general&Itemid=46

Worked great on my SMF CC too!
The administrator has disabled public write access.
The following user(s) said Thank You: leomitch

Re: Flat ground blade? 2 years 11 months ago #911

  • t76turbo
  • t76turbo's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 13
  • Thank you received: 1
  • Karma: 3
Thank you sir...... Thats what I was looking for.
The administrator has disabled public write access.
Time to create page: 0.120 seconds