Welcome, Guest
Username: Password: Remember me

TOPIC: M390 Ok?

M390 Ok? 2 years 7 months ago #347

  • Los
  • Los's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 5
  • Karma: 0
I just wanted to check and see if the Wicked Edge system could handle M390 Super Steel? Only reason I ask is because I've heard it destorys some other kits.

I'm particularly looking to sharpen a Benchmade 581 Barrage

Thanks for the help.
"Beware of false knowledge; it is more dangerous than ignorance."
-George Bernard Shaw

v/r

Carlos
Last Edit: 2 years 7 months ago by Los. Reason: More Info
The administrator has disabled public write access.

Re: M390 Ok? 2 years 7 months ago #350

  • komitadjie
  • komitadjie's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 85
  • Thank you received: 7
  • Karma: 11
It's rated to sharpen ceramic blades, so it shouldn't have any trouble at all with the M390.
"Sometimes you have fun, sometimes the fun has you!" -- Sgt. Schlock
The administrator has disabled public write access.
The following user(s) said Thank You: Los

Re: M390 Ok? 2 years 7 months ago #354

  • Los
  • Los's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 5
  • Karma: 0
Thanks for the info. Looking forward to trying it out. I'll make sure and update this post with my results.
"Beware of false knowledge; it is more dangerous than ignorance."
-George Bernard Shaw

v/r

Carlos
The administrator has disabled public write access.

Re: M390 Ok? 2 years 7 months ago #389

  • dschur
  • dschur's Avatar
  • OFFLINE
  • Senior Boarder
  • Posts: 46
  • Thank you received: 10
  • Karma: 10
I've done S90V on it without issue, so I imagine M390 is fine. The Diamond paddles can eat the crap out of anything when reprofiling,

I did back down to the 50/80 paddles on the S90V for the first profile and burr though.
The administrator has disabled public write access.

Re: M390 Ok? 2 years 7 months ago #391

  • hammer
  • hammer's Avatar
  • OFFLINE
  • Junior Boarder
  • Posts: 24
  • Thank you received: 4
  • Karma: 5
CPM4 is no problem either
It's a sick world I'm a happy guy
The administrator has disabled public write access.
Time to create page: 0.120 seconds