Welcome, Guest
Username: Password: Remember me

TOPIC: WEPS Vs "Chris" type blade

WEPS Vs "Chris" type blade 3 years 1 month ago #161

  • NeverDull
  • NeverDull's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 8
  • Karma: 2
Another question.... Received a wavy "Cris" (-10sp) type stilletto from a client today. I have the curved stones but this blade has no edge whatsoever. Would it destroy the mid grit curved stones attaining an edge? Do I just utilize the edge of the existing 100/200 and go from there to put an edge on this?
The administrator has disabled public write access.

Re: WEPS Vs "Chris" type blade 3 years 1 month ago #165

  • wickededge
  • wickededge's Avatar
  • OFFLINE
  • Administrator
  • Posts: 1801
  • Thank you received: 649
  • Karma: 92
I've sharpened a Kriss style blade before and I used the curved stones. Like yours, the knife had no edge at all. What I found was that the steel was incredibly soft and could not actually hold an edge. I got it much sharper than it was, but it was pretty futile. If the knife you've received is made from good steel, you can try riding the edges of your diamond stones to cut the initial bevels in and the refine them with the curved stones and then the strops.
--Clay Allison
The administrator has disabled public write access.
Time to create page: 0.110 seconds