Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC: Hand plane blades

Re:Hand plane blades 4 weeks 23 hours ago #17925

  • cbwx34
  • cbwx34's Avatar
  • OFFLINE
  • Moderator
  • Posts: 1260
  • Thank you received: 413
  • Karma: 92
Another option you might toy around with, is to mount a bar 90 deg. from the base...


h6ebc36d.jpg



... I did it by mounting the original angle bar to a piece of aluminum (stuff I had around) and clamping it, but there's probably a better way. :)
Last Edit: 4 weeks 23 hours ago by cbwx34.
The administrator has disabled public write access.
The following user(s) said Thank You: wickededge, gregg776

Hand plane blades 3 weeks 6 days ago #17934

  • wickededge
  • wickededge's Avatar
  • OFFLINE
  • Administrator
  • Posts: 1759
  • Thank you received: 608
  • Karma: 91
As always, inspired by Curtis:

Scissors-1.jpg


Scissors-2.jpg


Scissors-3.jpg


It was pretty easy to take a piece of 5/16" key stock and drill the two holes that lined up with the back of the L-Bracket. From there, the rest was a piece of cake.
--Clay Allison
The administrator has disabled public write access.
The following user(s) said Thank You: razoredgeknives, mark76, gregg776, LeoBarr, DanMaloon

Hand plane blades 3 weeks 6 days ago #17936

  • razoredgeknives
  • razoredgeknives's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 700
  • Thank you received: 299
  • Karma: 38
wow sweet!! when is this going into a "new product announcement" thread?!
The administrator has disabled public write access.

Hand plane blades 3 weeks 6 days ago #17938

  • DanMaloon
  • DanMaloon's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 115
  • Thank you received: 57
  • Karma: 4
Might help
CAM00780.jpg
The administrator has disabled public write access.
The following user(s) said Thank You: wickededge

Hand plane blades 3 weeks 6 days ago #17939

  • DanMaloon
  • DanMaloon's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 115
  • Thank you received: 57
  • Karma: 4
Hey the uploads are working again. Try another
CAM00810.jpg


CAM00809.jpg
The administrator has disabled public write access.
The following user(s) said Thank You: wickededge, razoredgeknives, mark76

Hand plane blades 3 weeks 6 days ago #17942

  • razoredgeknives
  • razoredgeknives's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 700
  • Thank you received: 299
  • Karma: 38
DanMaloon wrote:
Hey the uploads are working again. Try another

CAM00809.jpg

with this second set up you could convex beauty shears to extremely low angles. You would just need a riser for that right joint, similar to what clay has come up with!
The administrator has disabled public write access.
The following user(s) said Thank You: DanMaloon

Hand plane blades 3 weeks 6 days ago #17943

  • cbwx34
  • cbwx34's Avatar
  • OFFLINE
  • Moderator
  • Posts: 1260
  • Thank you received: 413
  • Karma: 92
Scissors-3.jpg



Looks like it needs to be a tad longer... but that looks pretty cool!


CAM00809.jpg


Like this one... simple but effective.
Last Edit: 3 weeks 6 days ago by cbwx34.
The administrator has disabled public write access.
The following user(s) said Thank You: wickededge, DanMaloon

Hand plane blades 3 weeks 5 days ago #17949

  • DanMaloon
  • DanMaloon's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 115
  • Thank you received: 57
  • Karma: 4
Convex. Few swipes at different angles
CAM00816.jpg
The administrator has disabled public write access.
The following user(s) said Thank You: wickededge, razoredgeknives
  • Page:
  • 1
  • 2
Time to create page: 0.161 seconds