Welcome, Guest
Username: Password: Remember me

TOPIC: Tape for ceramic stones

Re: Tape for ceramic stones 1 year 10 months ago #7869

  • mr.cheapguy
  • mr.cheapguy's Avatar
  • Senior Boarder
  • Posts: 41
  • Thank you received: 4
  • Karma: 10
Tapes rely on contact to make the mechanical bond, the more uneven/unpolished the surface the less mechanical bond there will be.

We used to use M77 to mount masks to blast granite stones and memorial markers. Then the cleanup would be with Naptha, cause that stuff didn't want to come off the stone.

Chances are high a good rubber cement for countertops/formica installation would work fine, you just need to bray it onto the paddle and the stone evenly, so you don't get any humps, or off angles, when pressed together.
Sometimes I ain't that sharp.
The administrator has disabled public write access.

Re: Tape for ceramic stones 1 year 9 months ago #8112

  • AndrewLippa
  • AndrewLippa's Avatar
  • Fresh Boarder
  • Posts: 5
  • Thank you received: 1
  • Karma: 2
After reading posts on this thread to date, it sounds like the issue is either intrinsic to the tape/plastic or due to water exposure. If the latter, do you use a specific type of Elmer's? Unless they've reformulated the classic school glue, I'm pretty sure it's water soluble...

Thanks for your help!
The administrator has disabled public write access.
Time to create page: 0.113 seconds