Welcome, Guest
Username: Password: Remember me

TOPIC: Any news of Pro Pack 2 upgrades?

Re: Any news of Pro Pack 2 upgrades? 1 year 11 months ago #5574

  • dessch
  • dessch's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 3
  • Karma: 0
PhilipPasteur wrote:
Well... I got my new base bar and the arm sliders that Clay so kindly replaced for me (even though in my ignorance, I butchered the originals up).
I bolted it all together yesterday and everything is working fine. The calibrated markings are great and etched to be more visible than before. I do use the angle cube, but they are nice to have anyway.
Just thought I would let everyone know that I am very happy with the new parts, and even more so with the nice folks at WEPS and the customer service that they provide.

Phil

Hey Phil, are these the bars that have extended angles for the new arms?
The administrator has disabled public write access.

Re: Any news of Pro Pack 2 upgrades? 1 year 11 months ago #5575

  • PhilipPasteur
  • PhilipPasteur's Avatar
  • OFFLINE
  • Platinum Boarder
  • Phil
  • Posts: 944
  • Thank you received: 233
  • Karma: 66
Yes they are.
Keep in mind I odered my upgraded arms and sliders almost a month before they were even in house at WEPS. I think I got one of the first few sets sent out. I also was one who had the problems with one of the early base bars that did not allow the new sliders with tighter tolerances to slide freely. In error I filed the inside of the sliders to make them work. This did the trick, but also allowed them to rock a bit at certain places on the rod. I called and talked to Kay, then Clay and told them my story. The put me on the list very early to get a replacement bar and new (even though I screwed them up) sliders.

I don't know how this all fits into the overall shipping schedule for the new arm sets and PRO Pack II kits. Apparenly though, the new bars must be available. I am sure the sets could be going out once everything is ready at WEPS.

Long answer to a short question, but I thought the whole story would be helpful for anyone anxiously awaiting their arm upgrades or PRO Pack II sets.

Phil
Phil

MAX 2001-2013
Hoping there is that bridge!
I miss you Buddy!
Last Edit: 1 year 11 months ago by PhilipPasteur.
The administrator has disabled public write access.
The following user(s) said Thank You: dessch

Re: Any news of Pro Pack 2 upgrades? 1 year 11 months ago #5606

  • wickededge
  • wickededge's Avatar
  • OFFLINE
  • Administrator
  • Posts: 1801
  • Thank you received: 648
  • Karma: 92
10/1/2012 Update

Many thanks to Fred Hermann for kindly nudging me to keep people updated :) We received 25 of the new Base Rods at the end of last week and have been shipping those out. That was all the supplier produced before their engraver went on the fritz. They since have got it back up and running and are working on the remaining pieces. I'll be able to get an update from them in the morning with an ETA for the rest of the pieces. We have everything else in stock so once the rods come in, we'll be shipping fast and furious. Thankfully we've mostly eliminated our backorder folder and also have some extra help in-house right now so things should roll pretty quickly. If you've got a Pro-Pack II or Upgrade on order, thank you very much for your patience. I can say very confidently that these new parts are awesome and you'll love using them.

--Clay
--Clay Allison
The administrator has disabled public write access.

Re: Any news of Pro Pack 2 upgrades? 1 year 11 months ago #5618

  • FredHermann
  • FredHermann's Avatar
  • OFFLINE
  • Gold Boarder
  • Posts: 208
  • Thank you received: 41
  • Karma: 18
*grins*

CHEERS from the back bleachers!
“On one otherwise normal Tuesday evening I had the chance to live the American dream. I was able to throw my incompetent jack*ss of a boss from a fourteenth-story window.”

Owen Pitt – Monster Hunter International
The administrator has disabled public write access.

Re: Any news of Pro Pack 2 upgrades? 1 year 11 months ago #5626

  • SvenSchläfke
  • SvenSchläfke's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 12
  • Thank you received: 2
  • Karma: 2
wickededge wrote:
10/1/2012 Update

Many thanks to Fred Hermann for kindly nudging me to keep people updated :) We received 25 of the new Base Rods at the end of last week and have been shipping those out. That was all the supplier produced before their engraver went on the fritz. They since have got it back up and running and are working on the remaining pieces. I'll be able to get an update from them in the morning with an ETA for the rest of the pieces. We have everything else in stock so once the rods come in, we'll be shipping fast and furious. Thankfully we've mostly eliminated our backorder folder and also have some extra help in-house right now so things should roll pretty quickly. If you've got a Pro-Pack II or Upgrade on order, thank you very much for your patience. I can say very confidently that these new parts are awesome and you'll love using them.

--Clay

Hey Clay you are pretty funny! "If you have a ProPack II on Backorder....."

I AM STILL WAITING FOR IT TO APPEAR ON THE WEBSITE SO I CAN LOOK WHAT IS INCLUDED AND SO I CAN ORDER WHAT I NEED!

I'm waiting a damn long time now for any relieable info (included pieces/price) and it seems behind the scenes the new WE Pro Pack II gets shipped while I do not even know a way to order!
So probably I will be last in line and probably can't even order one before they run out again.

Really, not to offend but I'm pretty pissed now, waiting for any info / chance to order just to hear they get shipped already. Seems others are somehow able to order....

Sven.
The administrator has disabled public write access.

Re: Any news of Pro Pack 2 upgrades? 1 year 11 months ago #5630

  • wickededge
  • wickededge's Avatar
  • OFFLINE
  • Administrator
  • Posts: 1801
  • Thank you received: 648
  • Karma: 92
Hi Sven,

I'm sorry you're feeling pissed. I haven't wanted to list them on the site yet since we don't have all the parts but people have been calling in and pre-ordering, plus we took some pre-orders when we introduced the Pro-Pack II at Blade Show, which are the ones we are shipping now. Blade Show as back in June. You're welcome to call in anytime. I'll also send you a PM with all the specs of both the Pro-Pack II and the upgrade and we can handle your order via email, PayPal, the phone or whatever your preference is. Once the Base Rods come in, I'll be listing everything on the site.
SvenSchläfke wrote:
wickededge wrote:
10/1/2012 Update

Many thanks to Fred Hermann for kindly nudging me to keep people updated :) We received 25 of the new Base Rods at the end of last week and have been shipping those out. That was all the supplier produced before their engraver went on the fritz. They since have got it back up and running and are working on the remaining pieces. I'll be able to get an update from them in the morning with an ETA for the rest of the pieces. We have everything else in stock so once the rods come in, we'll be shipping fast and furious. Thankfully we've mostly eliminated our backorder folder and also have some extra help in-house right now so things should roll pretty quickly. If you've got a Pro-Pack II or Upgrade on order, thank you very much for your patience. I can say very confidently that these new parts are awesome and you'll love using them.

--Clay

Hey Clay you are pretty funny! "If you have a ProPack II on Backorder....."

I AM STILL WAITING FOR IT TO APPEAR ON THE WEBSITE SO I CAN LOOK WHAT IS INCLUDED AND SO I CAN ORDER WHAT I NEED!

I'm waiting a damn long time now for any relieable info (included pieces/price) and it seems behind the scenes the new WE Pro Pack II gets shipped while I do not even know a way to order!
So probably I will be last in line and probably can't even order one before they run out again.

Really, not to offend but I'm pretty pissed now, waiting for any info / chance to order just to hear they get shipped already. Seems others are somehow able to order....

Sven.
--Clay Allison
The administrator has disabled public write access.
Time to create page: 0.141 seconds