Welcome, Guest
Username: Password: Remember me

TOPIC: new arms

Re: new arms 2 years 1 month ago #4474

  • RalphHoneycutt
  • RalphHoneycutt's Avatar
  • OFFLINE
  • Junior Boarder
  • Posts: 25
  • Thank you received: 3
  • Karma: 3
Received the new arms this evening. The left side arm does not fit. The arm stops before 26 degrees. I tried using some emory cloth on the left side of the bar which did nothing. I thought about using my 60/80 grit diamond paddles on the bar, but decided to post this message instead. Will call Kyle, Kay or Clay tomorrow.

Thanks,

Ralph
The administrator has disabled public write access.

Re: new arms 2 years 1 month ago #4475

  • mark76
  • mark76's Avatar
  • OFFLINE
  • Administrator
  • Posts: 1279
  • Thank you received: 411
  • Karma: 87
wickededge wrote:
we100pr2up-3.jpg

This is absolutely uebercool. Yes, it sure looks like a work of engineering art :cheer: :cheer:
wickededge wrote:
  • Micro-adjustment of angle of +/- .05 degrees (it's finer than .05 degrees but we're limited to what we can measure)

Does this mean we can mix stones much easier than now (i.e., much easier readjusting of the angle)? For example, one of the progressions I do now is diamond stones -> ceramic stones (same thickness) -> Choseras (thicker) -> Shaptons (again another thickness) -> home-made strops (very thin). This works great, but it is a bit of a hassle to change angles every time and be precise < .5 degrees. Will it now become easier to change the angles and be precise < .05 degrees?
Last Edit: 2 years 1 month ago by mark76.
The administrator has disabled public write access.
The following user(s) said Thank You: sharperthannew

Re: new arms 2 years 1 month ago #4478

  • cbwx34
  • cbwx34's Avatar
  • OFFLINE
  • Moderator
  • Posts: 1260
  • Thank you received: 413
  • Karma: 92
Very nice!!
mark76 wrote:
Does this mean we can mix stones much easier than now (i.e., much easier readjusting of the angle)? For example, one of the progressions I do now is diamond stones -> ceramic stones (same thickness) -> Choseras (thicker) -> Shaptons (again another thickness) -> home-made strops (very thin). This works great, but it is a bit of a hassle to change angles every time and be precise < .5 degrees. Will it now become easier to change the angles and be precise < .05 degrees?

I had a chance to try the prototypes, and my answer would be it is much easier with the new arms to switch between stones of different thickness. For what you're doing, I'd consider it a "must have". The micro-adjustment works in a very controlled manner moving the arms in and out. You would need a way to measure the angle, which is where the digital guage comes in, but over time, you would probably "just know" what adjustment to make between stones... in other words moving from ceramic to Chosera = 1/2 turn out, Chosera to Shapton 1/4 turn in, etc. (Of course it would change over time with stone wear, so a periodic check would be needed).

This, in my opinion, is a big plus in making the system compatible with other stones, strops, etc. being made.
The administrator has disabled public write access.
The following user(s) said Thank You: mark76

Re: new arms 2 years 1 month ago #4481

  • wickededge
  • wickededge's Avatar
  • OFFLINE
  • Administrator
  • Posts: 1801
  • Thank you received: 649
  • Karma: 92
Hey Ralph,

It looks like we might have a certain number of the Base Rods that were slightly larger than spec and you might have one. We'll get a new one on the way to you today.

--Clay
RalphHoneycutt wrote:
Received the new arms this evening. The left side arm does not fit. The arm stops before 26 degrees. I tried using some emory cloth on the left side of the bar which did nothing. I thought about using my 60/80 grit diamond paddles on the bar, but decided to post this message instead. Will call Kyle, Kay or Clay tomorrow.

Thanks,

Ralph
--Clay Allison
The administrator has disabled public write access.

Re: new arms 2 years 1 month ago #4482

  • wickededge
  • wickededge's Avatar
  • OFFLINE
  • Administrator
  • Posts: 1801
  • Thank you received: 649
  • Karma: 92
RalphHoneycutt wrote:
I thought about using my 60/80 grit diamond paddles on the bar...

Ralph

You could do that, or grab it with some pliers and set it on a belt grinder to take the stock down, but that is a lot of hassle you don't need to go through. I'll make sure your new rod gets to you quickly.
--Clay Allison
The administrator has disabled public write access.

Re: new arms 2 years 1 month ago #4485

  • RalphHoneycutt
  • RalphHoneycutt's Avatar
  • OFFLINE
  • Junior Boarder
  • Posts: 25
  • Thank you received: 3
  • Karma: 3
Clay, Thanks for the quick reply. I just spoke with Kay and she is taking care of this. I will probably want to get the next upgrade with angle cube feature when available.

Thanks again,

Ralph
The administrator has disabled public write access.
Time to create page: 0.134 seconds