Welcome, Guest
Username: Password: Remember me

TOPIC: Advice for sharpening Brous Reloader

Advice for sharpening Brous Reloader 3 months 1 day ago #17604

  • bigshoe83
  • bigshoe83's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 3
  • Karma: 0
Hey guys, does anyone have experience sharpening the Reloader? It has a recurve that transitions into a semi tanto toward the tip. I don't want the bevel to look weird in the recurve portion. Any tips on getting even bevels? Thanks in advance.


Sent from my iPad using Tapatalk
The administrator has disabled public write access.

Advice for sharpening Brous Reloader 2 months 4 weeks ago #17632

  • wickededge
  • wickededge's Avatar
  • OFFLINE
  • Administrator
  • Posts: 1781
  • Thank you received: 646
  • Karma: 91
I've sharpened a couple of these. They are pretty straight forward, and easy to sharpen. Positioning is important and making sure you treat the two sections independently is paramount. Make sure you don't allow the stone to rock over the vertex between the recurve section and the front section. You can use a marker to help you find the optimum positioning. I haven't entered one into the database since all the ones I sharpened were at shows and I wasn't recording data.
--Clay Allison
The administrator has disabled public write access.
The following user(s) said Thank You: razoredgeknives

Re:Advice for sharpening Brous Reloader 2 months 3 weeks ago #17671

  • bigshoe83
  • bigshoe83's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 3
  • Karma: 0
Thank you sir.
The administrator has disabled public write access.
Time to create page: 0.116 seconds